Product List
Hot Product
  • Low smoke low halogen flame retardant control cable
  • Shielded power cable
  • Welding Cable
  • 4/6 AWG Duplex Service Drop
  • Metal shielded power cable
  • TR-XLPE Insulated URD Cable
  • Low smoke low halogen flame r
  • Shielded power cable
  • Welding Cable
  • 4/6 AWG Duplex Service Drop
  • Metal shielded power cable
  • TR-XLPE Insulated URD Cable
Projects

XLPE Insulated PVC Sheathed Power Cable


XLPE Insulated PVC Sheathed Power Cable
Standard: IEC60502-1 ,VDE 0276-603, ICEA S-95-658 and other
Capacity: 2000km/month
Voltage: low voltage
Application: Suitable for power supply stations,indoors,cable ducts,outdoors,underground, water and other places
   


XLPE cable structure:
 
Conductor:
Copper or aluminum, round, multiwire stranded and compact
 
Inner semi-conducting layer:
Semi-conducting compound, cross-linked
 
Insulation:
Cross-linked polyethylene (XLPE), compound type
 
Outer semi-conducting layer:
Semi-conducting compound, cross-linked,
 
Concentricity of conductor:
The difference between the maximum and minimum value of 0.5 mm should not be exceeded.
 
Semi-conducting type:
Over the outer semi-conducting layer, a semi-conducting tape must be used.
 
Screen:
Screening of copper wires must have a minimum diameter of 0,5 mm and over that a copper tape applied helically with a minimum thickness of 0,1 mm.
 
Separator:
Over the screen as well as under outer jacket, a separating layer must be used (e.g. taping).
 
Outer jacket:
PE compound or PVC compound
 
XLPE Insulated PVC Sheathed Power Cable advantages:
1. good electrical, mechanical and thermal characteristics;
2. excellent moisture, chemical and weather resistant;
3. low dielectric factor than PVC insulation and better dielectric constant;
4. constant performance at a long temperature range;
5. long service span;
6. LV: IEC60502-1 ,VDE 0276-603, ICEA S-95-658 ,AS/NZS 5000.1
7. MV :IEC60502-2 ,VDE 0276-620 ,AS/NZS1429.1 ,ICEA S93-639 ,ICEA S94-649
8. HV :IEC 60840 ,AS/NZS1429.2 ,VDE 0276-632
 
XLPE insulation power cable application:
Suitable for installation mostly for power supply stations, in indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch-boards and power stations. Due to the good laying characteristic, this can also be laid easilyin difficult line guideways.

Previous:none       Next:XLPE Insulation PE Sheathed Power Cable