Product List
Hot Product
  • Low smoke low halogen flame retardant control cable
  • Shielded power cable
  • Welding Cable
  • 4/6 AWG Duplex Service Drop
  • Metal shielded power cable
  • TR-XLPE Insulated URD Cable
  • Low smoke low halogen flame r
  • Shielded power cable
  • Welding Cable
  • 4/6 AWG Duplex Service Drop
  • Metal shielded power cable
  • TR-XLPE Insulated URD Cable
Projects

Power Cable Transport

Release time:2018-02-07 13:16 hit:


cable druming
Sealing  and  Drumming
Before dispatch the manufacturer shall seal and cap both end of all cables so that to prevent the ingress of water during transportation and storage, projecting end of cables shall be protected from mechanical damage.
Packing
The cables shall be supplied on non returnable drums with mild steel reinforced hub plates, with the inner end of cable brought out through the side of the drum(s). Each drum shall be durably marked with a distinguishing number on the outside of the flange, and particulars of
cable i.e. voltage, length, conductor size, and cable type. The gross mass shall be shown and the direction rolling shall be indicated by arrow.
Shipment
Cable drums shall be provided with a permanently attached readily visible identification tag(s). Identification should remain intact from the time of initial dispatch at work to the final destination. The greatest care must be taken to ensure that shipping and associated documents with exact description for custom release are accompanied with the shipment. 


Previous:Medium Voltage Cables       Next:Power Cable Tests And Certification