Product List
Hot Product
  • Low smoke low halogen flame retardant control cable
  • Shielded power cable
  • Welding Cable
  • 4/6 AWG Duplex Service Drop
  • Metal shielded power cable
  • TR-XLPE Insulated URD Cable
  • Low smoke low halogen flame r
  • Shielded power cable
  • Welding Cable
  • 4/6 AWG Duplex Service Drop
  • Metal shielded power cable
  • TR-XLPE Insulated URD Cable
Projects

XLPE Insulated PVC Sheated Armoured Power Cable


XLPE Insulated PVC Sheated Armoured Power Cable
Standard: GB/T12706.1-12706.4-2008,but also according to the user needs
Capacity: 2000km/month
Voltage: 35Kv and below
Application: installation in the air, indoor, cable trench, tunnel or underground
   


Main application:
45kv and below cross linked polyethylene insulated power cable is suitable for the transmission of power transmission and distribution lines in AC 50Hz, rated voltage 35Kv and below. Compared with PVC power cable, the product not only has excellent electrical performance, mechanical properties, heat aging resistance, environmental stress and chemical corrosion resistance ability, and the structure is simple, light weight, without laying gap limit, long-term working temperature (90℃), etc.
 
Execution standard:
GB/T12706.1-12706.4-2008, but also according to the user needs, the use of International Electrical Commission IEC60502-1997 standards.
 
operational performance:
1, during cable laying, the ambient temperature is not less than 0℃, otherwise it is required to be heated in advance. The laying of the cable is not limited.
2, the minimum bending radius of the cable laying is as follows:
Single core cable: 20 (d+D) ± 5%;
Three core cable: 15 (d+D) ± 5%.
(D is the actual outer diameter of the cable, d is the actual outer diameter of the conductor)
3, short circuit (the longest continuous is 5s) temperature should not exceed 250℃.
 
Cable core number: 1, 2, 3, 3+1, 3+2, 4, 4+1, 5 and other form
The rated voltage(KV):
0.6/1 3.6/6 6/6 6/10 8.7/10 8.7/15 12/20 18/20 18/30 21/35 26/35
 
XLPE insulated PVC sheated power cable type and application:
 
Copper/Aluminum conductor
YJV /YJLV Cross-linked polyethylene insulated PVC sheathed power cable:
Fixed installation in the air, indoor, cable trench, tunnel or underground
 
YJY /YJLY XLPE insulated, PE sheathed power cable:
Fixed installation in the indoor, cable trench, tunnel or underground
 
YJV22/YJLV22 Cross-linked polyethylene insulating tape armored PVC sheathed power cable:
Fixed installation in the places where outside pressure
 
YJV23/YJLV23 Cross-linked polyethylene insulating steel tape armored PE sheathed power cable:
Fixed installation in the place with common external force
 
YJV32/YJLV32 XLPE insulated fine steel wire armored PVC sheathed power cable:Fixed installation in the places required to withstand the tension
 
YJV33/YJLV33 XLPE insulated fine steel wire armoured PE sheathed power cable:Fixed installation in the place where can withstand the tension
 
YJV42/YJLV42 XLPE insulation thick steel wire armoured PVC sheathed power cable:
Fixed installation in the shaft or underwater or other places where can  withstand the tension
 
YJV43/YJLV43 XLPE insulation thick steel wire armoured PE sheathed power cable:
Fixed installation in the places where can bear larger tension
 

Previous:none       Next:XLPE Insulated LSOH Sheathed Power Cable